Positioning drive AG06 Fieldbus
PRODUCENT CODE: -
CATEGORY: Fieldbus actuators
Producer: SIKO GmbH
The product is available on request
At the moment, the product is not available in our warehouse.
After placing the order, we will notify you of the expected delivery date of the product.
At the moment, the product is not available in our warehouse.
After placing the order, we will notify you of the expected delivery date of the product.
Fast shipping
Free delivery
from 1000 PLN (net)
Free delivery
from 1000 PLN (net)
Do you have questions about the product?
Ask an experienced consultant:
Ask an experienced consultant:
Description
The AG06 actuator is a compact and powerful actuator with high torque and is particularly suitable for automated positioning tasks. The integrated position controller with magnetic absolute sensor ensures precise positioning.
- easy mounting, no additional coupling needed
- stainless steel hollow shaft, glass fibre reinforced casing
brushless 24 VDC motor with long service life
- solid absolute sensor, magnetic sensing technology
- 2-line LCD for target and position value and operating keys
2 LEDs for user guidance
integrated RS485 or CANopen interface
- Integrated positioning controller
- M8 + M12 component mounting technology
- Industry 4.0 ready
Technical data
Mechanical data | |
Shaft | stainless steel |
Housing | glass-fiber reinforced plastic |
Clamping ring | stainless steel |
Torque pin | stainless steel |
Nominal torque/rated speed | 7 Nm at 30 rpm ±10 % (i = 188) 13 Nm at 15 rpm ±10 % (i = 368 (14 Nm temporarily adm. break-away torque)) |
Operating mode | S3 intermittent duty: 25 % DC, 10 min. (EN 60034-1) |
Weight | ~0.9 kg |
Electrical data | |
Operating voltage | 24 V DC ±10 % (reverse polarity protected, output stage) 24 V DC ±10 % (reverse polarity protected, control) |
Current consumption | 2.42 A (max. adm. at set point 100% (output stage)) |
Power input | ≤58 W (output stage) ≤1.6 W (control) |
Battery | CR2477N, 3 V lithium, 950 mAh |
Battery service life | ~5 year(s) (depending on environmental conditions) |
Parameter storage | 106 cycles (also applies to calibration operations) |
Rated current | 2.2 A ±10 % (at max. adm. torque (output stage)) <60 mA (at 24 V DC (control)) |
Display/display range | 5-digit LCD 7-segment, ~7 mm height (decimal points, 2 rows, special characters) |
Special character | battery, direction arrows |
Status display | two LEDs |
Keys | parameterizing, resetting, inching, setpoint definition |
Bus connection | RS485; CANopen (no galvanic isolation) |
Type of connection | 1x M12-plug connector (A-coded) (4-pole, 1x pin) 2x M8 plug connectors (4-pole, 1x socket, 1x pin) grounding via flat connector 6.3 mm |
System data | |
Resolution | 720 increments/revolution shaft |
Repeat accuracy | ±1 increment(s) |
Travel range | ±697 revolution(s) (i = 188) ±356 revolution(s) (i = 368) |
Failure rate | 31 year(s) (CAN, at 60° C (MTBF) according to SN29500) 31.3 year(s) (S3/09, at 60° C (MTBF) according to SN29500) |
Ambient conditions | |
Ambient temperature | 0 … 45 °C |
Storage temperature | -20 … 60 °C |
Relative humidity | condensation inadmissible |
EMC | EN 61800-3, second environment (interference resistance / immission) EN 61800-3, C3 (emitted interference / emission) |
Protection category | IP54, IP65 (EN 60529, mating connectors mounted) |
Shock resistance | 500 m/s2, 11 ms (EN 60068-2-27) |
Vibration resistance | ≤100 m/s2, 5 … 150 Hz (EN 60068-2-6) |
Downloads