Positioning drive AG26 Fieldbus/IE
PRODUCENT CODE: -
CATEGORY: Fieldbus actuators
Producer: SIKO GmbH
The product is available on request
At the moment, the product is not available in our warehouse.
After placing the order, we will notify you of the expected delivery date of the product.
At the moment, the product is not available in our warehouse.
After placing the order, we will notify you of the expected delivery date of the product.
Fast shipping
Free delivery
from 1000 PLN (net)
Free delivery
from 1000 PLN (net)
Do you have questions about the product?
Ask an experienced consultant:
Ask an experienced consultant:
Description
Thanks to special power and control electronics, absolute sensor technology and integrated position controller, the compact AG26 actuator is particularly well suited for optimizing for machining processes and setup times. Areas of application are to be found wherever positioning tasks are to be solved decentrally in the machine or system with as little installation space and low weight as possible. Even high torques can be implemented without problems.
- compact dimensions, high power density
- easy mounting and commissioning
- High flexibility, high protection class
- stainless steel 20 mm hollow shaft, robust housing
- Brushless EC motor with a long service life
- solid absolute sensor, magnetic sensing technology
- integrated power and control electronics
- Integrated Industrial-Ethernet-Fieldbus
- Integrated positioning controller
- M12 component mounting technology
- Industry 4.0 ready
Technical data
Mechanical data | |
Shaft | stainless steel |
Housing | glass-fiber reinforced plastic / zinc die-cast |
Clamping ring | stainless steel |
Torque pin | stainless steel |
Nominal torque/rated speed | 7 Nm at 30 rpm ±10 % (i = 188) 13 Nm at 15 rpm ±10 % (i = 368 (transiently adm. break-away torque 14 Nm)) |
Operating mode | intermittent duty S3: 25% DC, 10 min. (EN 60034-1) |
Weight | ~1.2 kg |
Electrical data | |
Operating voltage | 24 V DC ±10 % (reverse polarity protected, output stage) 24 V DC ±10 % (reverse polarity protected, control) |
Current consumption | 2.2 A ±10 % (at nominal torque/speed (output stage)) <150 mA (starting current >150 mA (control)) |
Power input | ≤58 W (output stage) ≤3.6 W (control) |
Battery | CR2477N, 3 V lithium, 950 mAh |
Battery service life | ~5 year(s) (depending on ambient conditions) |
Parameter storage | 106 cycles (also applies to calibration operations) |
Digital inputs | 17 … 30 V DC (typically 10 mA) |
Status display | 8 LEDs |
Keys | 2 internal keys, internal DIP switch |
Switching outputs | 24 V DC ±10 % (≤40 mA) |
Bus connection | EIP-EtherNet/IP EPN-PROFINET ECT-EtherCAT EPL-POWERLINK |
Type of connection | 2x M12 plug connectors (A-coded) (4-pole, 1x pin; 8-pole, 1x pin) 2x M12 plug connectors (D-coded) (4-pole, 2x socket) grounding via flat connector 6.3 mm |
System data | |
Resolution | 720 steps/revolution shaft |
Repeat accuracy | ±1 steps/revolution |
Travel range | ±697 revolution(s) (i = 188) ±356 revolution(s) (i = 368) |
Failure rate | 28.3 year(s) (at 60° C (MTBF) according to SN29500) |
Approval | UL 2011, CSA C22.2 No. 14-18, File No. E502992 |
Ambient conditions | |
Ambient temperature | 0 … 45 °C |
Storage temperature | -20 … 60 °C |
Relative humidity | condensation inadmissible |
EMC | EN 61800-3, second environment (interference resistance / immission) EN 61800-3, C2 (emitted interference / emission) |
Protection category | IP54, IP65 (EN 60529, only with mating connector (degree of protection not tested by UL)) |
Shock resistance | 500 m/s2, 11 ms (EN 60068-2-27) |
Vibration resistance | ≤100 m/s2, 5 … 150 Hz (EN 60068-2-6) |
Downloads