« Back
Level limit switch Capcont LS

Level limit switch Capcont LS

PRODUCENT CODE: -
CATEGORY: Capacitive sensors ACS
Producer: ACS Control System
The product is in categories:
Product withdrawn from sale.
In order to select a replacement, contact our consultant.
Do you have questions about the product?
Ask an experienced consultant:
+48 32 237 61 98 w. 101
bn@newtech.com.pl
Description

For capacitive filling level supervision in liquids and solids

  • For use in hygienic areas
  • Switching point can be easily adjusted via the sliding sleeve
  • Very compact

The level limit switch Capcont LS is suitable for limit value detection of also as dry run protection in liquids and viscous substances and also in powdery and fine granular substances. Like e.g. grain, flour, powdered milk, mixing food, cement, chalk or gypsum.
It can be used in electrically conductive as well as in non-conductive materials.
The device is certificated for the use as overflow protection acc. to WHG.

Capcont LS with integrated evaluation electronic is a compact filling level limit switch for supervision of filling levels.

Application

  • liquids and solids within container or pipes
  • also in explosive hazardous areas
  • process temperatures from – 40°C to +140°C
  • process pressures from –1 up to 10 bar.
  • with metallic gasket and rod isolation in PEEK is especially suitable for the use in hygienic applications

Function

The device is a capacitive operating sensor for limit value detection. Electrode rod, filling material and container wall creates an electrical capacitor. The contact of the electrode rod with the filling material produces a variation in capacity. That is evaluated by the electronic and converted in a correspondent switching action.
The detection of a filling level signal is indicated at the plug side of the device by a yellow LED and converted into a switching command and output at the PNP switching output. This allows the drive of relays, contactors, magnetic vents, optical indicators, horns as well as of SPS inputs.
At a switching reaction, the voltage of the connection terminal 1 (+L) is output alternating by two contrary operated semiconductor switches at two connection terminals. The adjustment of the responsitivity of the device to the respective filling material is done by a potentiometer.
Capcont LS is mounted from the top side of the pressure container or of the pipe. Capcont LL is mounted from the top side or into the side wall of the pressure container or of the pipe.

Technical data
Hilfsenergie
Spannungsversorgung 10 V bis 35 V DC (verpolungsgeschützt)
Stromaufnahme ≤ 10mA Schaltausgang im Leerlauf
Schaltausgang
Funktion PNP-Transistorausgang, auf Kontakt +L
Ausgangsstrom ≤ 500mA strombegrenzt, kurzschlussfest
Sperrstrom ≤ 100µA
Verzögerungszeit ≤ 200ms
≥  5Hz
Schalthysterese Abhängig vom Medium
Empfindlichkeitsabgleich Trimmer mehrgängig
Werkstoffe
Elektrodenstabisolation PTFE – Polytetrafluorethylen (Teflon®) (bei Variante LS)
PEEK (bei Variante LL)
Prozessanschluss Stahl 1.4404 (AISI 316L)
Stahl 1.4571 (AISI 316Ti)
Gerätestecker M12x1 Fassung:CrNi-Stahl
Einsatz: PUR
Kontakte vergoldet
Dichtungen (prozessberührend) FPM – Fluorelastomer (Viton®)
EPDM – Etylen-Propylen-Dienmonomer
Umgebungsbedingungen
Umgebungstemperatur -40°C bis +100°C (Einschränkungen bei Ex-Ausführung)
Prozesstemperatur Capcont LS: -40°C bis +100°C (Einschränkungen bei Ex-Ausführung)
Capcont LL: -40°C bis +140°C (Einschränkungen bei Ex-Ausführung)
Prozessdruck Capcont LS: -1bar bis +1bar
Capcont LL: -1bar bis +10bar
Schutzart IP68 / 3mH20 für 1h DIN EN 60529