Precont® PU4SE
At the moment, the product is not available in our warehouse.
After placing the order, we will notify you of the expected delivery date of the product.
Free delivery
from 1000 PLN (net)
Ask an experienced consultant:
Pressure transmitter for measurement of relative pressure in gases, vapors, liquids and dust – even from harzadous areas
- 2-wire electronics 4 … 20mA programmable via HART
- Versions with Modbus and IO-Link available
- Degree of protection IP69K
The device Precont® PU4SE is an electronic pressure transmitter / pressure switch for monitoring, control and continuous measurement of pressures.
A high variety of versions of process connections and electronic types allows the use for a wide range of applications, also for demanding measuring requirements.
Due to its high accuracy and the digital adjustability by HART®, RS485 Modbus®-RTU or IO-Link® the device Precont® PU4SE can be suited to a wide variety of applications.
The robust design and the high-quality workmanship turns the device into a very high quality product, which even the most adverse environmental conditions cannot affect, whether the lowest temperatures when used outdoors, extreme shock and vibration stress or aggressive media.
A captive laser marking of the type label ensures the identifiability throughout the entire lifetime of the device.
Obviously is the optional marking of a measurement point designation resp. TAG, a customer label or of a neutral type label, of course also per laser marking.
A LABS- resp. silicone-free version, a factory calibration with calibration certificate and a customer specific configuration resp. preset is also optionally available like a material test certificate EN10204 3.1 or a factory certifications for drink water suitability.
Customer specific special versions can be realized short-term on request, e.g. special designs for the process connection or other process materials.
| Messbereich | |
| Nenndruck PN | 0bar bis +1bar bis 0bar bis +1000bar |
| Ausgang Typ A – Strom 4 bis 20mA HART® | |
| Analogausgang 4 bis 20mA | 3,9mA bis 20,5mA ≥ 3,8mA ≤ 22mA dI ≤ 1µA |
| Zeitverhalten | T90 ≤ 5ms ton ≤ 0,2s |
| Schnittstelle | HART®-konform (7.0) 1200 Bit/s |
| Ausgang Typ V – RS485 Modbus®-RTU | |
| Schnittstelle | RS485, bidirektional Modbus®-RTU 9600 Baud (4800 bis 38400 Baud) |
| Zeitverhalten | T90 ≤ 2ms ton ≤ 0,1s |
| Ausgang Typ L – IO-Link® | |
| Schnittstelle | IO-Link® V1.1 Com2 (38400 Baud) |
| Analogausgang | 0mA bis 20,5mA (bei 0 bis 20mA) ≤ 0,05mA (bei 0 bis 20mA) ≤ 22mA (bei 0 bis 20mA) dI ≤ 1µA (bei 0 bis 20mA) 3,8mA bis 20,5mA (bei 4 bis 20mA) ≥ 3,6mA (bei 4 bis 20mA) ≤ 22mA (bei 4 bis 20mA) dI ≤ 1µA (bei 4 bis 20mA) |
| Schaltausgang | 2x PP (Push-Pull) Schaltend auf +L/-L |
| Ausgang | Uout ≤ 0,2V ≥ Us – 2V Iout = 0mA bis 200mA |
| Zeitverhalten | T90 ≤ 2ms ton ≤ 0,1s |
| Hilfsenergie | |
| Versorgungsspannung Us (verpolungsgeschützt) | 9 V bis 35 V DC (bei Elektronik-Ausgang Variante A) 9 V bis 30 V DC (Ex) (bei Elektronik-Ausgang Variante A) 6 V bis 35 V DC (bei Elektronik-Ausgang Variante V) 9 V bis 35 V DC (bei Elektronik-Ausgang Variante L ohne IO-Link®) 18 V bis 30 V DC (bei Elektronik-Ausgang Variante L mit IO-Link®) |
| Messgenauigkeit | |
| Kennlinienabweichung | ≤ ±0,5% FSO |
| Langzeitdrift | ≤ ±0,2% FSO/Jahr |
| Temperaturabweichung | Tk Nullpunkt + Spanne ≤ ±0,05% FSO/K |
| Prozessbedingungen | |
| Prozesstemperatur | -25°C bis +100°C |
| Druckzyklen | ≥ 10Mio. (1,2xPN) |
| Umgebungsbedingungen | |
| Umgebungstemperatur | -25°C bis +100°C |
| Schutzart | IP69K/IP67 (EN/IEC 60529) |
| MTTF | 463 Jahre |
(