| Number of inputs and outputs |
Number of digital outputs: 2; Number of analogue outputs: 1 |
| Measuring range |
| -1...100 bar | -14...1450 psi | -0.1...10 MPa |
|
| Process connection |
threaded connection G 1 external thread sealing cone |
| Special feature |
Gold-plated contacts |
| Application |
flush mountable for the food and beverage industry |
| Media |
viscous media and liquids with suspended particles; liquids and gases; use in gases at pressures &rt; 25 bar only on request |
| Medium temperature [°C] |
-25...150 |
| Min. bursting pressure |
|
| Pressure rating |
|
| Vacuum resistance [mbar] |
-1000 |
| Type of pressure |
relative pressure; vacuum |
| No dead space |
yes |
| Min. insulation resistance [MΩ] |
100; (500 V DC) |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Integrated watchdog |
yes |
| Operating voltage [V] |
20...30 DC |
| Current consumption [mA] |
3.5...21.5 |
| Power-on delay time [s] |
< 1 |
| Operating voltage [V] |
18...30 DC |
| Current consumption [mA] |
5...45; (430 bei max. Laststrom) |
| Power-on delay time [s] |
< 0.5 |
| Number of inputs and outputs |
Number of digital outputs: 2; Number of analogue outputs: 1 |
| Total number of outputs |
2 |
| Output signal |
switching signal; analogue signal; IO-Link |
| Electrical design |
PNP/NPN |
| Number of digital outputs |
2 |
| Output function |
normally open / normally closed; (parameterisable) |
| Number of analogue outputs |
1 |
| Analogue current output [mA] |
4...20, invertible; (scalable) |
| Short-circuit protection |
yes |
| Type of short-circuit protection |
pulsed |
| Overload protection |
yes |
| Max. load [Ω] |
300 |
| Max. voltage drop switching output DC [V] |
2 |
| Permanent current rating of switching output DC [mA] |
100 |
| Switching frequency DC [Hz] |
125 |
| Max. load [Ω] |
(Ub - 10 V) / 21,5 mA; 650 Ω (Ub = 24 V) |
| Measuring range |
| -1...100 bar | -14...1450 psi | -0.1...10 MPa |
|
| Set point SP |
| -0.9...100 bar | -12...1450 psi | -0.09...10 MPa |
|
| Reset point rP |
| -1...99.9 bar | -15...1448 psi | -0.1...9.9 MPa |
|
| Analogue start point |
| -1...80 bar | -15...1160 psi | -0.1...8 MPa |
|
| Analogue end point |
| 19...100 bar | 276...1450 psi | 1.9...10 MPa |
|
| Min. difference between SP and rP |
|
| In steps of |
|
| Factory setting |
| | SP1 = 25 bar | rP1 = 23 bar | | | SP2 = 75 bar | rP2 = 73 bar | | | ASP = 0.00 bar | AEP = 100 bar | | | dAP = 0.06 s | dAA = 0.06 s |
|
| Measuring range |
| -25...150 °C | -13...302 °F |
|
| Switch point accuracy [% of the span] |
< ± 0,5; (DIN EN IEC 62828-1; Turn down 1:1) |
| Repeatability [% of the span] |
< ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation [% of the span] |
< ± 0,5; (DIN IEC EN 62828-1 incl. zero point and span error, non-linearity, hysteresis; Turn down 1:1) |
| Linearity deviation [% of the span] |
< ± 0,15; (Turn down 1:1) |
| Hysteresis deviation [% of the span] |
< ± 0,15; (Turn down 1:1) |
| Long-term stability [% of the span] |
< ± 0,1; (Turn down 1:1; per year) |
| Total deviation over temperature range |
| Temperature range | total deviation |
|---|
| -25...15 °C | Characteristics deviation ± 0,15 % of the span / 10 K | | 15...80 °C | Characteristics deviation | | 80...150 °C | Characteristics deviation ± 0,2 % of the span / 10 K |
|
| Notes on the accuracy / deviation |
for further details see section Diagrams and graphs |
| Accuracy [K] |
± 2,5+ (0,08 x ( Umgebungstemperatur - Mediumtemperatur )) |
| Repeatability [K] |
± 0,2 |
| Resolution [K] |
0.2 |
| Damping process value dAP [s] |
0...99.99 |
| Damping for the analogue output dAA [s] |
0...99.99 |
| Step response time analogue output [ms] |
30 |
| Min. response time of switching output (dAP) [ms] |
3 |
| Step response time analogue output [ms] |
7 |
| Dynamic response T05 / T09 [s] |
< 35 / < 135; (DIN EN 60751 water ; &rt; 0,9 m/s) |
| Communication interface |
IO-Link |
| Transmission type |
COM2 (38,4 kBaud) |
| IO-Link revision |
1.1 |
| SDCI standard |
IEC 61131-9 |
| Profiles |
Identification and Diagnosis (0x4000), Measurement Data Channel (0x800A) |
| SIO mode |
yes |
| Required master port type |
A |
| Min. process cycle time [ms] |
5.6 |
| IO-Link resolution pressure [bar] |
0.005 |
| IO-Link resolution temperature [K] |
0.2 |
| IO-Link process data (cyclical) |
| function | bit length |
|---|
| pressure | 32 | | temperature | 32 | | device status | 4 | | binary switching information | 2 |
|
| IO-Link functions (acyclical) |
application specific tag; internal temperature; operating hours counter; switching cycles counter; Pressure peak counter |
| Supported DeviceIDs |
| Type of operation | DeviceID |
|---|
| default | 1150 |
|
| Ambient temperature [°C] |
-25...80 |
| Storage temperature [°C] |
-40...100 |
| Protection |
IP 67; IP 68; IP 69K |
| EMC |
|
| Shock resistance |
| DIN EN 60068-2-27 | 50 g (11 ms) |
|
| Vibration resistance |
| DIN EN 60068-2-6 | 20 g (10...2000 Hz) |
|
| MTTF [years] |
214 |
| Note on approval |
| factory certificate available as download at www.factory-certificate.ifm |
|
| UL approval |
| UL Approval no. | J034 | | File number UL | E174189 |
|
| Weight [g] |
395.1 |
| Materials |
stainless steel (1.4404 / 316L); FKM; PTFE; PBT; PEI; PFA |
| Materials (wetted parts) |
ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE |
| Min. pressure cycles |
100 million |
| Tightening torque [Nm] |
20 |
| Process connection |
threaded connection G 1 external thread sealing cone |
| Display |
| Display unit | LED, green | | switching status | LED, yellow | | function display | alphanumeric display, 4-digit | | measured values | alphanumeric display, 4-digit |
|
| Display unit |
bar; psi; MPa |
| Pack quantity |
1 pcs. |
| Connection |
Connector: 1 x M12; coding: A; Contacts: gold-plated |
