| Number of inputs and outputs |
Number of digital outputs: 1; Number of analogue outputs: 1 |
| Measuring range |
| -1...6 bar | -14.5...87 psi | -100...600 kPa |
|
| Process connection |
Clamp DN25...DN40 (1...1,5") DIN 32676 (ISO 2852) |
| Special feature |
Gold-plated contacts |
| Measuring element |
ceramic-capacitive pressure measuring cell |
| Temperature monitoring |
no |
| Application |
flush mountable for the food and beverage industry |
| Media |
viscous media and liquids with suspended particles; liquids and gases |
| Medium temperature [°C] |
-25...150 |
| Min. bursting pressure |
| 100 bar | 1450 psi | 10000 kPa |
|
| Pressure rating |
|
| Note on pressure rating |
| take into account the pressure resistance of the bracket and the seal used for clamp connection |
|
| Vacuum resistance [mbar] |
-1000 |
| Type of pressure |
relative pressure; vacuum |
| No dead space |
yes |
| MAWP (for applications according to CRN) [bar] |
30 |
| Operating voltage [V] |
18...30 DC |
| Min. insulation resistance [MΩ] |
100; (500 V DC) |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Integrated watchdog |
yes |
| Current consumption [mA] |
3.5...21.5 |
| Power-on delay time [s] |
1 |
| Current consumption [mA] |
< 45 |
| Power-on delay time [s] |
0.5 |
| Number of inputs and outputs |
Number of digital outputs: 1; Number of analogue outputs: 1 |
| Total number of outputs |
2 |
| Output signal |
analogue signal; IO-Link; (configurable) |
| Number of digital outputs |
1; (IO-Link) |
| Number of analogue outputs |
1 |
| Analogue current output [mA] |
4...20; (scalable) |
| Max. load [Ω] |
700; (Ub = 24 V; (Ub - 9 V) / 21.5 mA) |
| Short-circuit proof |
yes |
| Overload protection |
yes |
| Measuring range |
| -1...6 bar | -14.5...87 psi | -100...600 kPa |
|
| Analogue start point |
| -1...4.8 bar | -14.5...69.6 psi | -100...480 kPa |
|
| Analogue end point |
| 0.2...6 bar | 2.9...87 psi | 20...600 kPa |
|
| In steps of |
| 0.02 bar | 0.05 psi | 0.2 kPa |
|
| Factory setting |
| | ASP = 0.0 bar | AEP = 6.0 bar |
|
| Repeatability [% of the span] |
< ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation [% of the span] |
< ± 0,2; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1) |
| Linearity deviation [% of the span] |
< ± 0,15; (Turn down 1:1) |
| Hysteresis deviation [% of the span] |
< ± 0,15; (Turn down 1:1) |
| Long-term stability [% of the span] |
< ± 0,1; (Turn down 1:1; per year) |
| Temperature coefficient zero point [% of the span / 10 K] |
< ± 0,05 |
| Temperature coefficient span [% of the span / 10 K] |
< ± 0,15 |
| Notes on the accuracy / deviation |
for further details see section Diagrams and graphs |
| Damping for the analogue output dAA [s] |
0...4 |
| Step response time analogue output [ms] |
30 |
| Step response time analogue output [ms] |
7 |
| Communication interface |
IO-Link |
| Transmission type |
COM2 (38,4 kBaud) |
| IO-Link revision |
1.1 |
| SDCI standard |
IEC 61131-9 |
| Profiles |
Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000) |
| SIO mode |
no |
| Required master port type |
A |
| Process data analogue |
3 |
| Min. process cycle time [ms] |
3.2 |
| IO-Link resolution pressure [bar] |
0.002 |
| IO-Link process data (cyclical) |
| function | bit length |
|---|
| pressure | 16 | | device status | 4 |
|
| IO-Link functions (acyclical) |
application specific tag; internal temperature |
| Supported DeviceIDs |
| Type of operation | DeviceID |
|---|
| default | 663 |
|
| Ambient temperature [°C] |
-25...80 |
| Storage temperature [°C] |
-40...100 |
| Protection |
IP 67; IP 68; IP 69K |
| EMC |
| DIN EN 61000-6-2 | | | DIN EN 61000-6-3 | |
|
| Shock resistance |
| DIN EN 60068-2-27 | 50 g (11 ms) |
|
| Vibration resistance |
| DIN EN 60068-2-6 | 20 g (10...2000 Hz) |
|
| MTTF [years] |
323 |
| Note on approval |
| factory certificate available as download at www.factory-certificate.ifm |
|
| UL approval |
| UL Approval no. | J055 | | File number UL | E174189 |
|
| Weight [g] |
393.6 |
| Materials |
stainless steel (1.4404 / 316L); PBT |
| Materials (wetted parts) |
ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE |
| Min. pressure cycles |
100 million |
| Process connection |
Clamp DN25...DN40 (1...1,5") DIN 32676 (ISO 2852) |
| Pack quantity |
1 pcs. |
| Connection |
Connector: 1 x M12; coding: A; Contacts: gold-plated |
| ambient temperature influence on the accuracy |
| X | temperature |
|---|
| Y | total deviation |
|---|
|
