| Number of inputs and outputs |
Number of digital outputs: 2; Number of analogue outputs: 1 |
| Measuring range |
| -1...1 bar | -1000...1000 mbar | -14.5...14.5 psi | -29.5...29.5 inHg | -402...402 inH2O | -100...100 kPa |
|
| Process connection |
threaded connection 1/4" NPT external thread |
| Special feature |
Gold-plated contacts |
| Measuring element |
ceramic-capacitive pressure measuring cell |
| Application |
for industrial applications |
| Media |
liquids and gases |
| Medium temperature [°C] |
-25...80 |
| Min. bursting pressure |
| 30000 mbar | 450 psi | 3000 kPa |
|
| Pressure rating |
| 10000 mbar | 145 psi | 1000 kPa |
|
| Vacuum resistance [mbar] |
-1000 |
| Type of pressure |
relative pressure; vacuum |
| MAWP (for applications according to CRN) |
| 20 bar | 20000 mbar | 290 psi | 2000 kPa |
|
| Operating voltage [V] |
18...30 DC; (to SELV/PELV) |
| Current consumption [mA] |
< 35 |
| Min. insulation resistance [MΩ] |
100; (500 V DC) |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Power-on delay time [s] |
0.3 |
| Integrated watchdog |
yes |
| Number of inputs and outputs |
Number of digital outputs: 2; Number of analogue outputs: 1 |
| Total number of outputs |
2 |
| Output signal |
switching signal; analogue signal; IO-Link; (configurable) |
| Electrical design |
PNP/NPN |
| Number of digital outputs |
2 |
| Output function |
normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V] |
2 |
| Permanent current rating of switching output DC [mA] |
250 |
| Switching frequency DC [Hz] |
< 500 |
| Number of analogue outputs |
1 |
| Analogue current output [mA] |
4...20; (scalable 1:5) |
| Max. load [Ω] |
500 |
| Analogue voltage output [V] |
0...10; (scalable 1:5) |
| Min. load resistance [Ω] |
2000 |
| Short-circuit protection |
yes |
| Type of short-circuit protection |
pulsed |
| Overload protection |
yes |
| Measuring range |
| -1...1 bar | -1000...1000 mbar | -14.5...14.5 psi | -29.5...29.5 inHg | -402...402 inH2O | -100...100 kPa |
|
| Analogue start point |
| -1000...600 mbar | -14.5...8.7 psi | -29.5...17.7 inHg | -402...240 inH2O | -100...60 kPa |
|
| Analogue end point |
| -600...1000 mbar | -8.7...14.5 psi | -17.7...29.5 inHg | -240...402 inH2O | -60...100 kPa |
|
| Set point SP |
| -985...1000 mbar | -14.3...14.5 psi | -29.2...29.5 inHg | -396...402 inH2O | -98.5...100 kPa |
|
| Reset point rP |
| -995...990 mbar | -14.45...14.4 psi | -29.4...29.3 inHg | -400...398 inH2O | -99.5...99 kPa |
|
| Min. difference between SP and rP |
| 10 mbar | 0.15 psi | 0.3 inHg | 4 inH2O | 1 kPa |
|
| In steps of |
| 5 mbar | 0.05 psi | 0.1 inHg | 2 inH2O | 0.5 kPa |
|
| Set point SP |
| -987...1000 mbar | -14.32...14.5 psi | -29.2...29.5 inHg | -396...401 inH2O | -98.7...100 kPa |
|
| Reset point rP |
| -996...992 mbar | -14.44...14.38 psi | -29.4...29.3 inHg | -400...398 inH2O | -99.6...99.2 kPa |
|
| Min. difference between SP and rP |
| 9 mbar | 0.12 psi | 0.3 inHg | 4 inH2O | 0.9 kPa |
|
| In steps of |
| 1 mbar | 0.01 psi | 0.1 inHg | 1 inH2O | 0.1 kPa |
|
| Switch point accuracy [% of the span] |
< ± 0,4; (Turn down 1:1) |
| Repeatability [% of the span] |
< ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation [% of the span] |
< ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting) |
| Hysteresis deviation [% of the span] |
< ± 0,1; (Turn down 1:1) |
| Long-term stability [% of the span] |
< ± 0,05; (Turn down 1:1; per 6 months) |
| Temperature coefficient zero point [% of the span / 10 K] |
< ± 0,2; (-0...80 °C) |
| Temperature coefficient span [% of the span / 10 K] |
< ± 0,2; (-0...80 °C) |
| Notes on the accuracy / deviation |
switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1% |
| Response time [ms] |
< 1.5 |
| Delay time programmable dS, dr [s] |
0...50 |
| Damping process value dAP [s] |
0...4 |
| Damping for the analogue output dAA [s] |
0...4 |
| Max. response time analogue output [ms] |
3 |
| Parameter setting options |
hysteresis / window; normally open / normally closed; switch-on/switch-off delay; Damping; Display unit; current/voltage output |
| Communication interface |
IO-Link |
| Transmission type |
COM2 (38,4 kBaud) |
| IO-Link revision |
1.1 |
| SDCI standard |
IEC 61131-9 |
| SIO mode |
yes |
| Required master port type |
A; (when pin 2 not connected: B) |
| Supported DeviceIDs |
| Type of operation | DeviceID |
|---|
| Factory setting / CMPT = 2 | 477 | | Status_B High Resolution / CMPT = 3 | 993 |
|
| Note |
| For further information please see the IODD PDF file under "Downloads" |
|
| Profiles |
Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis |
| Min. process cycle time [ms] |
2.3 |
| IO-Link resolution pressure [mbar] |
1 |
| IO-Link process data (cyclical) |
| function | bit length |
|---|
| pressure | 14 | | binary switching information | 2 |
|
| IO-Link functions (acyclical) |
application specific tag |
| Profiles |
Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000) |
| Min. process cycle time [ms] |
3 |
| IO-Link resolution pressure [mbar] |
1 |
| IO-Link process data (cyclical) |
| function | bit length |
|---|
| pressure | 16 | | device status | 4 | | binary switching information | 2 |
|
| IO-Link functions (acyclical) |
application specific tag |
| Ambient temperature [°C] |
-25...80 |
| Storage temperature [°C] |
-40...100 |
| Protection |
IP 65; IP 67 |
| EMC |
| DIN EN 61000-6-2 | | | DIN EN 61000-6-3 | |
|
| Shock resistance |
| DIN EN 60068-2-27 | 50 g (11 ms) |
|
| Vibration resistance |
| DIN EN 60068-2-6 | 20 g (10...2000 Hz) |
|
| MTTF [years] |
138 |
| UL approval |
|
| Pressure Equipment Directive |
Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Weight [g] |
246 |
| Materials |
stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC |
| Materials (wetted parts) |
stainless steel (1.4404 / 316L); AI2O3 (96%; ceramics); FKM |
| Min. pressure cycles |
100 million |
| Tightening torque [Nm] |
&rt; 50; (depends on lubrication, seal and pressure rating) |
| Process connection |
threaded connection 1/4" NPT external thread |
| Restrictor element integrated |
no (can be retrofitted) |
| Display |
| Display unit | 5 x LED, green (mbar, psi, kPa, inH2O, inHg) | | switching status | 2 x LED, yellow | | measured values | alphanumeric display, red/green 4-digit |
|
| Pack quantity |
1 pcs. |
| Connection |
Connector: 1 x M12; coding: A; Contacts: gold-plated |
