Number of inputs and outputs |
Number of digital outputs: 2 |
Measuring range |
0...25 bar | 0...362 psi | 0...2.5 MPa |
|
Process connection |
threaded connection 1/4" NPT internal thread |
Special feature |
Gold-plated contacts |
Measuring element |
ceramic-capacitive pressure measuring cell |
Application |
for industrial applications |
Media |
liquids and gases |
Medium temperature [°C] |
-25...80 |
Min. bursting pressure |
|
Pressure rating |
|
Type of pressure |
relative pressure |
MAWP (for applications according to CRN) |
|
Operating voltage [V] |
18...30 DC; (to SELV/PELV) |
Current consumption [mA] |
< 35 |
Min. insulation resistance [MΩ] |
100; (500 V DC) |
Protection class |
III |
Reverse polarity protection |
yes |
Power-on delay time [s] |
< 0.3 |
Integrated watchdog |
yes |
Number of inputs and outputs |
Number of digital outputs: 2 |
Total number of outputs |
2 |
Output signal |
switching signal; IO-Link; (configurable) |
Electrical design |
PNP/NPN |
Number of digital outputs |
2 |
Output function |
normally open / normally closed; (parameterisable) |
Max. voltage drop switching output DC [V] |
2.5 |
Permanent current rating of switching output DC [mA] |
150; (200 (...60 °C) 250 (...40 °C)) |
Switching frequency DC [Hz] |
< 170 |
Short-circuit protection |
yes |
Type of short-circuit protection |
pulsed |
Overload protection |
yes |
Measuring range |
0...25 bar | 0...362 psi | 0...2.5 MPa |
|
Set point SP |
0.2...25 bar | 4...362 psi | 0.02...2.5 MPa |
|
Reset point rP |
0.1...24.9 bar | 2...360 psi | 0.01...2.49 MPa |
|
Min. difference between SP and rP |
|
In steps of |
|
Set point SP |
0.2...25 bar | 3...363 psi | 0.02...2.5 MPa |
|
Reset point rP |
0.1...24.9 bar | 1...361 psi | 0.01...2.49 MPa |
|
Min. difference between SP and rP |
|
In steps of |
|
Switch point accuracy [% of the span] |
< ± 0,5 |
Repeatability [% of the span] |
< ± 0,1; (with temperature fluctuations < 10 K) |
Characteristics deviation [% of the span] |
< ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting) |
Hysteresis deviation [% of the span] |
< ± 0,25 |
Long-term stability [% of the span] |
< ± 0,05; (per 6 months) |
Temperature coefficient zero point [% of the span / 10 K] |
< ± 0,2; (-0...80 °C) |
Temperature coefficient span [% of the span / 10 K] |
< ± 0,2; (-0...80 °C) |
Response time [ms] |
< 3 |
Delay time programmable dS, dr [s] |
0...50 |
Parameter setting options |
hysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping; Display unit |
Communication interface |
IO-Link |
Transmission type |
COM2 (38,4 kBaud) |
IO-Link revision |
1.1 |
SDCI standard |
IEC 61131-9 |
SIO mode |
yes |
Required master port type |
A; (when pin 2 not connected: B) |
Supported DeviceIDs |
Type of operation | DeviceID |
---|
Factory setting / CMPT = 2 | 453 | Status_B High Resolution / CMPT = 3 | 631 |
|
Note |
For further information please see the IODD PDF file under "Downloads" |
|
Profiles |
Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis |
Min. process cycle time [ms] |
2.3 |
IO-Link resolution pressure [bar] |
0.1 |
IO-Link resolution pressure [MPa] |
0.01 |
IO-Link process data (cyclical) |
function | bit length |
---|
pressure | 14 | binary switching information | 2 |
|
IO-Link functions (acyclical) |
application specific tag |
Profiles |
Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000) |
Min. process cycle time [ms] |
3 |
IO-Link resolution pressure [bar] |
0.01 |
IO-Link resolution pressure [MPa] |
0.001 |
IO-Link process data (cyclical) |
function | bit length |
---|
pressure | 16 | device status | 4 | binary switching information | 2 |
|
IO-Link functions (acyclical) |
application specific tag |
Ambient temperature [°C] |
-25...80 |
Storage temperature [°C] |
-40...100 |
Protection |
IP 65; IP 67 |
EMC |
DIN EN 61000-6-2 | | DIN EN 61000-6-3 | |
|
Shock resistance |
DIN EN 60068-2-27 | 50 g (11 ms) |
|
Vibration resistance |
DIN EN 60068-2-6 | 20 g (10...2000 Hz) |
|
MTTF [years] |
260 |
UL approval |
|
Pressure Equipment Directive |
Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
Weight [g] |
223.5 |
Materials |
stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC |
Materials (wetted parts) |
stainless steel (1.4404 / 316L); ceramics; FKM |
Min. pressure cycles |
100 million |
Tightening torque [Nm] |
2...3 turns after hand-fastening; recommended tightening torque; depends on lubrication, seal and pressure rating |
Process connection |
threaded connection 1/4" NPT internal thread |
Restrictor element integrated |
no (can be retrofitted) |
Display |
Display unit | 3 x LED, green (bar, psi, MPa) | switching status | 2 x LED, yellow | measured values | alphanumeric display, red/green 4-digit |
|
Pack quantity |
1 pcs. |
Connection |
Connector: 1 x M12; coding: A; Contacts: gold-plated |