Number of inputs and outputs |
Number of digital outputs: 2 |
Measuring range |
0...600 bar | 0...8700 psi | 0...60 MPa |
|
Process connection |
threaded connection G 1/4 external thread (DIN EN ISO 1179-2); internal thread:M5 |
Measuring element |
metallic thin film cell |
Application |
for industrial applications |
Media |
liquids and gases |
Medium temperature [°C] |
-40...90 |
Min. bursting pressure |
2500 bar | 36255 psi | 250 MPa |
|
Pressure rating |
1500 bar | 21755 psi | 150 MPa |
|
Note on pressure rating |
|
Vacuum resistance [mbar] |
-1000 |
Type of pressure |
relative pressure |
Operating voltage [V] |
18...30 DC |
Current consumption [mA] |
< 15 |
Min. insulation resistance [MΩ] |
100; (500 V DC) |
Protection class |
III |
Reverse polarity protection |
yes |
Power-on delay time [s] |
< 0.3 |
Number of inputs and outputs |
Number of digital outputs: 2 |
Total number of outputs |
2 |
Output signal |
switching signal; IO-Link; (configurable) |
Electrical design |
PNP/NPN |
Number of digital outputs |
2 |
Output function |
normally open / normally closed; (parameterisable) |
Max. voltage drop switching output DC [V] |
2 |
Permanent current rating of switching output DC [mA] |
100 |
Switching frequency DC [Hz] |
< 130 |
Short-circuit protection |
yes |
Type of short-circuit protection |
pulsed |
Overload protection |
yes |
Measuring range |
0...600 bar | 0...8700 psi | 0...60 MPa |
|
Set point SP |
6...600 bar | 87...8702 psi | 0.6...60 MPa |
|
Reset point rP |
3.1...597.1 bar | 44...8660 psi | 0.31...59.71 MPa |
|
In steps of |
|
Factory setting |
SP1 = 150 bar | rP1 = 138 bar | ou1 = Hno; | SP2 = 450 bar | rP2 = 438 bar | ou2 = Hno; | dS1/dS2 = 0 ms | dr1/dr2 = 0 ms | | coF = 0 % | P-n = PnP | dAP= 60 ms |
|
Measuring range |
|
Set point SP |
-38...90 °C | -36.4...194 °F |
|
Reset point rP |
-40...88 °C | -40...190.4 °F |
|
In steps of |
|
Switch point accuracy [% of the span] |
< ± 0,5 (nach DIN EN 61298-2) |
Repeatability [% of the span] |
< ± 0,05; (with temperature fluctuations < 10 K) |
Characteristics deviation [% of the span] |
< ± 0,5; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1) |
Linearity deviation [% of the span] |
< ± 0,1 (BFSL) / < ± 0,2 (LS) |
Hysteresis deviation [% of the span] |
< ± 0,2 |
Long-term stability [% of the span] |
< ± 0,1; (per 6 months) |
Temperature coefficient zero point [% of the span / 10 K] |
< 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C) |
Temperature coefficient span [% of the span / 10 K] |
< 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C) |
Accuracy [K] |
± 2 K + (0.1 x (ambient temperature - medium temperature)) |
Notes on the accuracy / deviation |
temperature range -10 to 80 °C |
Response time [ms] |
< 3 |
Dynamic response T05 / T09 [s] |
< 80 / < 210 ( under ifm reference conditions ) |
Parameter setting options |
hysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping |
Communication interface |
IO-Link |
Transmission type |
COM2 (38,4 kBaud) |
IO-Link revision |
1.1 |
SDCI standard |
IEC 61131-9 |
Profiles |
Identification and Diagnosis (0x4000), Measurement Data Channel (0x800A) |
SIO mode |
yes |
Required master port type |
A |
Process data analogue |
5 |
Process data binary |
2 |
Min. process cycle time [ms] |
4.5 |
IO-Link resolution pressure [bar] |
0.2 |
IO-Link resolution pressure [MPa] |
0.02 |
IO-Link resolution temperature [K] |
0.2 |
IO-Link process data (cyclical) |
function | bit length |
---|
pressure | 16 | temperature | 16 | device status | 4 | binary switching information | 2 |
|
IO-Link functions (acyclical) |
application specific tag; internal temperature; operating hours counter; switching cycles counter; Pressure peak counter; Temperature peak counter |
Supported DeviceIDs |
Type of operation | DeviceID |
---|
default | 1216 |
|
Ambient temperature [°C] |
-40...90 |
Storage temperature [°C] |
-40...100 |
Protection |
IP 67; IP 69K |
EMC |
|
Shock resistance |
DIN EN 60068-2-27 | 500 g (1 ms) |
|
Vibration resistance |
DIN EN 60068-2-6 | 20 g (10...2000 Hz) |
|
UL approval |
UL Approval no. | J038 | File number UL | E174189 |
|
Pressure Equipment Directive |
Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
Weight [g] |
57 |
Materials |
1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); PEI |
Materials (wetted parts) |
stainless steel (1.4305 / 303); 1.4542 (17-4 PH / 630) |
Min. pressure cycles |
60 million; (at 1.2 times nominal pressure) |
Tightening torque [Nm] |
25...35; (recommended tightening torque; depends on lubrication, seal and pressure rating) |
Process connection |
threaded connection G 1/4 external thread (DIN EN ISO 1179-2); internal thread:M5 |
Process connection sealing |
FKM (DIN EN ISO 1179-2) |
Restrictor element integrated |
yes |
Remarks |
BFSL = Best Fit Straight Line | LS = limit value setting |
|
Pack quantity |
1 pcs. |
Connection |
Connector: 1 x M12; coding: A |