Absolute encoder WH3600M
PRODUCENT CODE: -
CATEGORY: Absolute rotary encoders
Producer: SIKO GmbH
The product is available on request
At the moment, the product is not available in our warehouse.
After placing the order, we will notify you of the expected delivery date of the product.
At the moment, the product is not available in our warehouse.
After placing the order, we will notify you of the expected delivery date of the product.
Fast shipping
Free delivery
from 1000 PLN (net)
Free delivery
from 1000 PLN (net)
Do you have questions about the product?
Ask an experienced consultant:
Ask an experienced consultant:
Description
Specially developed for use in mobile machines, the absolute rotary encoder WH3600M provides reliable and precise measured values even under the toughest environmental conditions. Available as a singleturn and multiturn version and with an outer diameter of only 36 mm, it can also be mounted in applications with limited installation space. Despite the compact design, the WH3600M convinces with a wide variety of variants. In addition, the WH3600M has the optimum robustness thanks to its high degree of protection and salt mist-tested housing.
- CANopen (DS406) or SAE J1939 interface
- Extremely compact design with ø36 mm flange
- Single turn or multiturn variant available
- E1 approval by the German Federal Motor Transport Authority (KBA) pending
- Salt-spray resistant housing available
- With PURE.MOBILE technology
Technical data
| Mechanical data | |
| Shaft | rustproof stainless steel |
| Flange | aluminum |
| Housing | rustproof stainless steel |
| Speed | ≤3000 rpm |
| Moment of inertia | <29 gcm2 |
| Shaft load rating | ≤40 N (radial) ≤20 N (axial) |
| Electrical data | |
| Operating voltage | 8 … 36 V DC (reverse-polarity protected) |
| Power input | ≤1 W (at 36 V, without load) |
| Parameter storage | 105 cycles (also applies to calibration operations) |
| Status display | 1x two-color LEDs (red/green) (device / CAN status) |
| Power rating | ±36 V (CAN interface) |
| Interface | according to ISO 11898-1, not electrically isolated (CANopen) according to ISO 11898-1, not electrically isolated (SAE J1939) |
| Address | 1 … 127 (CANopen) 128 … 238 (SAE J1939) |
| Baud rate | 20 kbit/s (CANopen) 50 kbit/s (CANopen) 125 kbit/s (CANopen, SAE J1939) 250 kbit/s (CANopen, SAE J1939) 500 kbit/s (CANopen, SAE J1939) 800 kbit/s (CANopen) 1 Mbit/s (CANopen) |
| Cycle time | <10 ms |
| Starting time | <1000 ms |
| Parameter | according to CiA 301, CiA 303 Part 3, CiA 305, CiA 406 (CANopen) according to SAE J1939-21, -71, -81, DA (SAE J1939) |
| Type of connection | 1x M12 connector (A-coded) (5-pole, 1x pin (E12E connection type)) open cable end ( stranded wire cross-section 0.5 mm² ( E1 connection type)) |
| System data | |
| Scanning | magnetic |
| Resolution | 14 bit (singleturn, 16384 steps/rotation) |
| Measuring range | 1 revolution(s) (singleturn) 4096 revolution(s) (12 bit) 65536 revolution(s) (16 bit) |
| Ambient conditions | |
| Ambient temperature | -40 … +85 °C |
| Storage temperature | -40 … +85 °C |
| Relative humidity | 100 % (condensation permitted) |
| EMC | EN 61326-1 (industry immunity requirement, class B emission limit, shielded cable required) EN 61000-6-2 (interference resistance / immission) |
| Protection category | IP67 (EN 60529,installed according to assembly instructions and with suitable mating connector) |
| Salt spray test | severity level 3 (EN 60068-2-52) |
Downloads
(