« Back
Absolute encoder WV3600M

Absolute encoder WV3600M

PRODUCENT CODE: -
CATEGORY: Absolute rotary encoders
Producer: SIKO GmbH
The product is available on request
At the moment, the product is not available in our warehouse.
After placing the order, we will notify you of the expected delivery date of the product.
Fast shipping
Free delivery
from 1000 PLN (net)
Do you have questions about the product?
Ask an experienced consultant:
+48 32 237 61 98 w. 117
rw@newtech.com.pl
Description
Specially developed for use in mobile machines, the absolute rotary encoder WV3600M provides reliable and precise measured values even under the toughest environmental conditions. Available as a singleturn and multiturn version and with an outer diameter of only 36 mm, it can also be mounted in applications with limited installation space. Despite the compact design, the WV3600M convinces with a wide variety of variants. In addition, the WV3600M has the optimum robustness thanks to its high degree of protection and salt mist-tested housing.
  • CANopen (DS406) or SAE J1939 interface
  • Extremely compact design with ø36 mm flange
  • Single turn or multiturn variant available
  • E1 approval by the German Federal Motor Transport Authority (KBA) pending
  • Protection class up to IP6K9K
  • With PURE.MOBILE technology
Technical data
Mechanical data
Shaft rustproof stainless steel
Flange aluminum
Housing rustproof stainless steel
Speed ≤6000 rpm (with protection class IP65)
≤3000 rpm (with protection classes IP67 and IP6K9K)
Moment of inertia <3.5 gcm2
<4 gcm2 (with protection class IP6K9K)
Starting torque ≤2 Ncm at 20° C
Shaft load rating ≤60 N (radial)
≤40 N (axial)
≤200 N (radial, with protection class IP6K9K)
≤200 N (axial, with protection class IP6K9K)
Electrical data
Operating voltage 8 … 36 V DC (reverse-polarity protected)
Power input ≤1 W (at 36 V, without load)
Parameter storage 105 cycles (also applies to calibration operations)
Status display 1x two-color LEDs (red/green) (device / CAN status)
Power rating ±36 V (CAN interface)
Interface according to ISO 11898-1, not electrically isolated (CANopen)
according to ISO 11898-1, not electrically isolated (SAE J1939 Safety)
Address 1 … 127 (CANopen, CANopen Safety)
128 … 238 (SAE J1939 Safety)
Baud rate 20 kbit/s (CANopen)
50 kbit/s (CANopen)
125 kbit/s (CANopen, SAE J1939)
250 kbit/s (CANopen, SAE J1939)
500 kbit/s (CANopen, SAE J1939)
800 kbit/s (CANopen)
1 Mbit/s (CANopen)
Cycle time <10 ms
Starting time <1000 ms
Parameter according to CiA 301, CiA 303 Part 3, CiA 305, CiA 406 (CANopen)
according to SAE J1939-76 (SAE J1939 Safety)
Type of connection 1x M12 connector (A-coded) (5-pole, 1x pin (E12E connection type))
open cable end (
stranded wire cross-section 0.5 mm² ( E1 connection type))
System data
Scanning magnetic
Resolution 14 bit singleturn, 16384 steps/rotation (singleturn, 16384 steps/rotation)
Measuring range 1 revolution(s) (singelturn)
4096 revolution(s) (12 bit)
65536 revolution(s) (16 bit)
Ambient conditions
Ambient temperature -40 … +85 °C
Storage temperature -40 … +85 °C
Relative humidity 100 % (condensation permitted)
Protection category IP65 (EN 60529)
IP67, IP6K9K (EN 60529, ISO 20653, according to assembly instructions and with suitable mating connector)
IP6K9K (ISO 20653)
Salt spray test severity level 4 (EN 60068-2-52, installed according to assembly instructions and with suitable mating connector)