Absolute encoder WV5800M
PRODUCENT CODE: -
CATEGORY: Absolute rotary encoders
Producer: SIKO GmbH
The product is available on request
At the moment, the product is not available in our warehouse.
After placing the order, we will notify you of the expected delivery date of the product.
At the moment, the product is not available in our warehouse.
After placing the order, we will notify you of the expected delivery date of the product.
Fast shipping
Free delivery
from 1000 PLN (net)
Free delivery
from 1000 PLN (net)
Do you have questions about the product?
Ask an experienced consultant:
Ask an experienced consultant:
Description
The WV5800M rotary encoder is a magnetic absolute rotary encoder with solid shaft, which has been specially developed for use in mobile machines. Thanks to its particularly robust design and optionally a CANopen or SAE J1939 interface, it is ideally suited for tough conditions in mobile machines. It can be flexibly expanded functionally with its PURE.MOBILE extension boards! For example: Integrated inclination sensors, rotary switches for parameterization or digital inputs and outputs. In combination with wire-actuated encoders, the WV5800M can also be used for linear position monitoring.
- CANopen (DS406) or SAE J1939 interface
- Salt-spray resistant housing available
- High electro-magnetic compatibility
- With PURE.MOBILE technology
- Optional: Inclination sensor, bus address adjustable via rotary switch, digital I/O
- E1 Approval by the German Federal Office for Motor Vehicles
- Single turn or multiturn variant available
Technical data
| Mechanical data | |
| Shaft | stainless steel |
| Flange | Aluminum |
| Housing | aluminum diecasting (KTL coated) |
| Speed | ≤6000 rpm (IP65) ≤3000 rpm (IP67) |
| Moment of inertia | ≤8 gcm2 |
| Starting torque | ≤2 Ncm (at 20° C) |
| Shaft load rating | ≤80 N (radial) ≤40 N (axial) |
| Cable sheath | PVC (E1 connection type) |
| Cable bending radius | >25 mm (E1 connection type. static) |
| Mounting type | servo flange |
| Weight | ~0.35 kg |
| Electrical data | |
| Operating voltage | 8 … 36 V DC (reverse-polarity protected) |
| Current consumption | 20 mA (at 36 V) 28 mA (at 24 V) 76 mA (at 8 V) |
| Power input | ≤800 mW (without load) |
| Parameter storage | 105 cycles (also applies to calibration operations) |
| Status display | three-color LED (red/green/yellow) (device status/CAN status) |
| Power rating | ±36 V (CAN interface) |
| Interface | according to ISO 11898-1/2, not electrically isolated (CANopen, CiA 301, CiA 303 Part 3, CiA 305, CiA 406) |
| Address | 1 … 127 (node ID, via SDO or Layer Setting Service (LSS)) |
| Baud rate | 20 kbit/s 50 kbit/s 125 kbit/s 250 kbit/s 500 kbit/s 800 kbit/s 1 Mbit/s |
| Cycle time | typical 1.5 ms |
| Starting time | <150 ms |
| Parameter | according to CiA 301, CiA 303 Part 3, CiA 305, CiA 406 (CANopen) |
| Type of connection | 1x M12 connector (A-coded) (5-pin, 1x pin (E12E connection type)) 2x M12 connector (A-coded) (5-pin, 1x pin, 1x socket (E12 connection type)) open cable end (E1 connection type) |
| System data | |
| Scanning | magnetic |
| Resolution | 14 bit (single turn, 16384 steps/revolution) |
| Measuring range | 1 revolution(s) (single turn) 4096 revolution(s) |
| Approval | E1 (UN ECE R10 Approval No.: E1*10R05/01*8898*00) |
| Ambient conditions | |
| Ambient temperature | -40 … 85 °C |
| Storage temperature | -40 … 85 °C |
| Relative humidity | 100 % (condensation permitted) |
| EMC | EN 61000-6-2 (immunity to interference/immission) EN 61000-6-4 (interference emission/emission) EN 61326-3.1 (industry immunity requirement, class B emission limit) ISO 11452-1, -2, -3, -4, -5 (interference radiation ESA) ISO 7637-1, -2 (transient pulses) ISO 10605 (electrostatic discharge (ESD)) |
| Protection category | IP65 (EN 60529 fitted with suitable mating connector) IP67 (EN 60529) |
| Salt spray test | severity level 4 (EN 60068-2-52 (environmental condition SN)) |
| Shock resistance | 500 m/s2, 11 ms (EN 60068-2-27, half sine, 3 axes (+/-), each 3 shocks) |
| Vibration resistance | 100 m/s2, 10 … 2000 Hz (EN 60068-2-6, 3 axes, each 10 cycles) |
(