Draw-Wire Encoder SGH50

PRODUCENT CODE: -

CATEGORY: Position sensors for hydraulic cylinders

Producer: SIKO GmbH

The product is available on request
At the moment, the product is not available in our warehouse.
After placing the order, we will notify you of the expected delivery date of the product.

Fast shipping
Free delivery
from 1000 PLN (net)

Do you have questions about the product?
Ask an experienced consultant:

+48 32 237 61 98 w. 117
rw@newtech.com.pl

Description

Absolute position sensor for hydraulic cylinders, telescopic cylinders, and piston accumulators, based on the tried and tested wire-actuated sensor technology. Durable, reliable, and robust. Developed with the know-how of over 30 years of experience in wire-actuated sensor technology.

Measuring range 0 … 5000 mm (196.85 inches)
Absolute measuring system
Pressure-resistant up to 350 bar, pressure peaks up to 450 bar
High degree of flexibility, adjustable to all measuring lengths thanks to teach-in
Redundant interfaces (CAT3) available
Safety version usable up to Performace Level d
Analog, CANopen, SAE J1939, CANopen Safety interfaces
With PURE.MOBILE technology

Technical data

Mechanical data
Flange	aluminum (sealing ring (HNBR))
Housing	synthetic (PA66)
Wire design	ø0.45 mm (rustproof stainless steel)
Extension force	≥4 N
Acceleration	≤24 m/s²
Electrical data
Operating voltage	9 … 32 V DC (ambient condition MH, at output 0 ... 5 V, 0.5 ... 4.5 V, 0.25 ... 4.75 V, 1.0 ... 4.9 V, reverse polarity protected) 12 … 32 V DC (ambient condition MH, at output 0 ... 10 V, reverse polarity protected) 12 … 32 V DC (ambient condition MH, at output 0 ... 20 mA, 4 ... 20 mA, but UB > Uload +2.0 V, reverse-polarity protected) 24 V DC ±20% (ambient condition CE, reverse polarity protected)
Current consumption	<40 mA (at 24 V DC, per encoder) <80 mA (at 12 V DC, per encoder)
Power input	<1 W (without load, per encoder)
Parameter storage	10⁵ cycles (also applies to calibration operations)
Digital inputs	4 (Limit inputs (redundant)) 2 (Limit inputs (not redundant))
Input signal level high	>8.4 V
Input signal level low	<2.8 V
Output voltage	0 … 10 V (load current <1 mA) 0 … 5 V (load current <1 mA) 0.5 … 4.5 V (load current <1 mA) 0.25 … 4.75 V (load current <1 mA) 1 … 4.9 V (load current <1 mA)
Output current	0 … 20 mA (load ≤500 Ω) 4 … 20 mA (load ≤500 Ω)
Linearity tolerance	±0.25 % (5000 mm measuring length, ±0.5% output value range ≤15 mV)
Starting time	<150 ms
Type of connection	plug connection system (KV1H accessory)
Operating voltage	9 … 32 V DC (ambient condition MH, reverse polarity protected) 24 V DC ±20% (ambient condition CE, reverse polarity protected)
Current consumption	<40 mA (at 24 V DC, per encoder) <60 mA (at 12 V DC, per encoder)
Power input	<1 W (per encoder)
Parameter storage	10⁵ cycles (also applies to calibration operations)
Linearity tolerance	±0.25 % (5000 mm measurement length)
Interface	ISO 11898-1/2, not galvanically isolated (CANopen, CiA 301, CiA 305, CiA 406)
Address	1 ... 127 (Node ID, via SDO or Layer Setting Service (LSS))
Baud rate	20 kbit/s 50 kbit/s 125 kbit/s 250 kbit/s 500 kbit/s 800 kbit/s 1 Mbit/s
Cycle time	typical 1.5 ms
Starting time	<150 ms
Type of connection	plug connection system (KV1H accessory)
Operating voltage	9 … 32 V DC (ambient condition MH, reverse polarity protected) 24 V DC ±20 % (ambient condition CE, reverse polarity protected)
Current consumption	<40 mA (at 24 V DC, per encoder) <60 mA (at 12 V DC, per encoder)
Power input	<1 W
Parameter storage	10⁵ cycles (also applies to calibration operations)
Linearity tolerance	±0.25 % (5000 mm measuring length)
Interface	ISO 11898-1/2, not galvanically isolated (CANopen Safety, CiA 301, CiA 305, CiA 406, EN50325-5)
Address	1 ...127 (Node ID, via SDO or Layer Setting Service (LSS))
Baud rate	20 kbit/s 50 kbit/s 125 kbit/s 250 kbit/s 500 kbit/s 800 kbit/s 1 Mbit/s
Cycle time	typical 1.5 ms
Settling time	<150 ms
Type of connection	connector system (accessories KV1H)
System data
Scanning	magnetic
Resolution	12 bit (analog output) 0.1 mm (CANopen, SAE J1939, CANopen Safety)
Repeat accuracy	±0.15 mm (Unidirectional)
Measuring range	0 … 5000 mm (measuring range flexibly usable between 0 ... 5000 mm)
Travel speed	≤2 m/s
Failure rate	290 year(s) (analog output, at 40° C (MTBF) SN29500) 240 year(s) (CANopen, at 40° C (MTBF) SN29500) 540 year(s) (analog not redundant, at 40° C (MTBF) SN29500) 460 year(s) (CAN not redundant, at 40° C (MTBF) SN29500) 170 year(s) (CAN safety redundant, at 40° C (MTBF) SN29500) 730 year(s) (CANopen Safety, bei 60° C (MTTFd )) 156 FIT (CANopen Safety, at 60° C (PFH) 1 FIT = 1.0 E - 09 1/h) 84 % (CANopen safety, at 60° C 13849-1, Appendix E.2 (DCavg), IS)
Approval	E1 compliant (UN ECE R10 Approval number: E1 10 R - 05 8507)
Ambient conditions
Ambient temperature	-40 … 105 °C (electronics) -30 … 100 °C (mechanics. optionally to 105° C)
Storage temperature	-40 … 85 °C
Relative humidity	100 % (condensation admissible in the mounted and plugged condition)
Operating pressure	<350 bar (P_n based on ISO19879)
Overload pressure	<450 bar (P_max based on ISO 19879)
Test pressure	650 bar (P_static based on ISO 19879)
EMC	EN 61326-3.1 (ambient condition CE, industry immunity requirement, class B emission limit) ISO 11452-1,-2,-3,-4,-5 (ambient condition MH, interference EUB) ISO 7637-1,-2 (ambient condition MH, transient impulses) ISO 10605 (ambient condition MH, electrostatic discharge (ESD))
Protection category	IP67 (EN 60529, fitted with KV1H and suitable mating connector) IP6K9K (ISO 20653, fitted with KV1H and suitable mating connector)
Shock resistance	1000 m/s² , 11 ms (EN 60068-2-27)
Vibration resistance	70 m/s² , 10 ... 2000 Hz (EN 60068-2-64)