« Back
Inclinometer IMS360

Inclinometer IMS360

PRODUCENT CODE: -
CATEGORY: Inclinometers
Producer: SIKO GmbH
The product is available on request
At the moment, the product is not available in our warehouse.
After placing the order, we will notify you of the expected delivery date of the product.
Fast shipping
Free delivery
from 1000 PLN (net)
Do you have questions about the product?
Ask an experienced consultant:
+48 32 237 61 98 w. 117
rw@newtech.com.pl
Description
Thanks to its integrated acceleration sensor and gyroscope, the robust IMS360 inclination sensor offers an expanded range of dynamic applications. The sensor's innovative sensor-fusion algorithm compensates for externally-induced accelerations such as vibrations and shocks, thereby ensuring reliable inclination detection. Offering full IMU functionality, exceptional protection, a robust housing, and E1 certification (UN ECE R10), the IMS360 is ideally suited for use in all commercial and utility vehicles.
  • 6 Axis Inertial Measurement Unit (IMU)
  • Compensation of external acceleration thanks to innovative sensor fusion
  • Dynamically compensated inclination measurement (360° or ±90°)
  • CANopen (DS406) or SAE J1939 interface
  • IP6K9K, IP67 protection class
  • E1 Approval by the German Federal Office for Motor Vehicles
  • With PURE.MOBILE technology
Technical data
Mechanical data
Housing anodized aluminum
Mounting type 3-point mounting
Weight ~0.13 kg
Electrical data
Operating voltage 8 … 36 V DC (reverse-polarity protected)
Power input ≤600 mW (without load)
Status display 2x two-color LEDs (red/green) (device status/CAN status)
Power rating ±36 V (CAN interface)
Temperature drift 0.01 °/K
Interface according to ISO 11898-1/2, not electrically isolated (CANopen)
according to ISO 11898-1, not electrically isolated (SAE J1939)
Address 0 … 127
Baud rate 100 kbit/s
125 kbit/s
250 kbit/s
500 kbit/s
800 kbit/s
1 Mbit/s
Starting time <500 ms
Parameter according to CiA 301, CiA 303 Part 3, CiA 305, CiA 410 (CANopen)
according to SAE J1939-21, -71, -81, DA (SAE J1939)
Type of connection 1x M12 connector (A-coded) (5-pole, 1x pin (E12X connection type))
System data
Scanning MEMS
Resolution 1 µg
Measuring range ±2 g
Approval E1 (UN ECE R10 Approval No: E1*10R06/02*9376*01)
Scanning MEMS
Resolution 0.001 °/s
Measuring range ±1000 °/s
Approval E1 (UN ECE R10 Approval No: E1*10R06/02*9376*01)
Scanning MEMS
Resolution 0.01°
System accuracy ±0.3° (static)
±0.5° (dynamically compensated)
Measuring range 0 … 360° (1 axis, parameterizable)
±90° (2 axes, parameterizable)
Approval E1 (UN ECE R10 Approval No: E1*10R06/02*9376*01)
Ambient conditions
Ambient temperature -40 … 85 °C
Storage temperature -40 … 85 °C
Relative humidity 98 % (condensation not permitted)
EMC EN 61326-1 (industry immunity requirement)
EN 61000-4-2, -3, -4, -5, -6 (interference resistance / immission)
ISO 11452-2, -5 (interference radiation ESA)
ISO 7637-2, -3 (transient pulses)
ISO 10605 (electrostatic discharge (ESD))
Protection category IP67 (EN 60529 installed according to assembly instructions and with suitable mating connector)
IP6K5 (ISO20653 installed according to assembly instructions and with suitable mating connector)
IP6K9K (ISO20653 installed according to assembly instructions and with suitable mating connector)
Salt spray test sharpness degree 4 (EN 60068-2-52)
Shock resistance 490 m/s2, 6 ms (EN 60068-2-27, half sine, 3 axes (+/-), each 10 shocks)
Vibration resistance 10 … 2000 Hz (EN 60068-2-64, EN 60068-2-14, 3 axes, each 4 cycles)