Magnetic sensor MSK210
PRODUCENT CODE: -
CATEGORY: Linear position transducers - Magnetic sensors - Magnetic sensors
Producer: SIKO GmbH
The product is available on request
At the moment, the product is not available in our warehouse.
After placing the order, we will notify you of the expected delivery date of the product.
At the moment, the product is not available in our warehouse.
After placing the order, we will notify you of the expected delivery date of the product.
Fast shipping
Free delivery
from 1000 PLN (net)
Free delivery
from 1000 PLN (net)
Do you have questions about the product?
Ask an experienced consultant:
Ask an experienced consultant:
Description
- Max. resolution 25 μm
- max. resolution 0.045° with MR200 or MBR200 (100 poles)
- Repeat accuracy ±0.025 mm
- Repeat accuracy of ±1 increment
- Works with magnetic tape MB200/1
- Works with MR200 magnetic ring, MBR200 magnetic tape ring
Reading distance ≤1 mm
- Reading distance ≤0.8 mm
- Max. 4600 pulses/revolution with MBR200 (230 poles)
Technical data
| Mechanical data | |
| Housing | green plastic |
| Sensor/band reading distance | 0.1 … 1 mm (O, I reference signals) 0.1 … 0.4 mm (R reference signal) |
| Sensor/ring reading distance | 0.1 … 0.8 mm (O, I reference signals) 0.1 … 0.4 mm (R reference signal) |
| Cable sheath | PUR suitable for drag-chain use (4-wire ø4.4-0.4 mm; 5, 6, 8-wire ø5-0.4 mm) |
| Cable bending radius | 5x cable diameter (static) 7.5x cable diameter (dynamic) |
| Service life of cable | >5 million cycles (under the following test conditions: travel range 4.5 m travel speed 3 m/s acceleration 5 m/s2 ambient temperature 20 °C ±5 °C) |
| Electrical data | |
| Operating voltage | 24 V DC ±20 % (reverse polarity protected) 5 V DC ±5 % (no reverse polarity protection) |
| Current consumption | <20 mA (at 24 V DC, off-load) <75 mA (loaded) |
| Output circuit | PP, LD (RS422), TTL (PP only with 24 V) |
| Output signals | A, A/, B, B/, I, I/, R, R/ (quadrature signal) |
| Output signal level high | >UB - 2.5 V (PP) >2.5 V (LD) >2.4 V (TTL) |
| Output signal level low | <0.8 V (PP) <0.5 V (LD) <0.4 V (TTL) |
| Latency | 1.5 µs |
| Jitter | <15 % (0.5 mm reading distance) |
| Pulse width of reference signal | 1 increment(s) |
| Real-time requirement | speed-proportional signal output |
| Type of connection | open cable end plug connector (7/8-pole) D-Sub (9-pole) |
| System data | |
| Resolution | 0.025, 0.05, 0.1, 0.5 mm |
| Scaling factor | 1, 5, 10, 20 |
| System accuracy | ±(0.05 + 0.01 x L) mm, L in m (at TU = 20 °C) ±0.1° (at TU = 20 °C) |
| Repeat accuracy | ±1 increment(s) |
| Measuring range | ∞ |
| Circumferential speed | ≤25 m/s (≤2 m/s referencing speed) |
| Travel speed | ≤25 m/s (≤2 m/s referencing speed) |
| Ambient conditions | |
| Ambient temperature | -10 … 70 °C |
| Storage temperature | -30 … 80 °C |
| Relative humidity | 100 % (condensation admissible) |
| EMC | EN 61000-6-2 (interference resistance / immission) EN 61000-6-4 (emitted interference / emission) |
| Protection category | IP67 (EN 60529) |
| Shock resistance | 500 m/s2, 11 ms (EN 60068-2-27) |
| Vibration resistance | 100 m/s2, 5 … 150 Hz (EN 60068-2-6) |
(