Magnetic sensor MSK320
PRODUCENT CODE: -
CATEGORY: Linear position transducers - Magnetic sensors - Magnetic sensors
Producer: SIKO GmbH
The product is available on request
At the moment, the product is not available in our warehouse.
After placing the order, we will notify you of the expected delivery date of the product.
At the moment, the product is not available in our warehouse.
After placing the order, we will notify you of the expected delivery date of the product.
Fast shipping
Free delivery
from 1000 PLN (net)
Free delivery
from 1000 PLN (net)
Do you have questions about the product?
Ask an experienced consultant:
Ask an experienced consultant:
Description
- Max. resolution 12.5 μm
- max. resolution 0.006° with MR320 or MBR320 (250 poles)
- Repeat accuracy ±0.04 mm
- Repeat accuracy of ±1 increment
- Works with MB320/1 magnetic tape, MRI01 or MR320 magnetic ring, MBR320 magnetic tape ring
- Reading distance ≤2 mm
- Max. 16000 pulses/revolution in combination with MR320 or MBR320 (250 poles)
- Optionally with reference point R or flexible reference marks FR
Technical data
| Mechanical data | |
| Housing | red plastic (A design) steel (F design) zinc die-cast (ZM design) |
| Sensor/band reading distance | 0.1 … 2 mm (O, I reference signals) 0.1 … 1.5 mm (R reference signal) 0.4 … 1 mm (FR reference signal) |
| Sensor/ring reading distance | 0.1 … 2 mm (O, I reference signals) 0.1 … 1 mm (R reference signal) |
| Cable sheath | PUR suitable for drag-chain use (4-wire ø4.4-0.4 mm; 5, 6, 8-wire ø5-0.4 mm) |
| Cable bending radius | 5x cable diameter (static) 7.5x cable diameter (dynamic) |
| Service life of cable | >5 million cycles (under the following test conditions: travel range 4.5 m travel speed 3 m/s acceleration 5 m/s2 ambient temperature 20 °C ±5 °C) |
| Electrical data | |
| Operating voltage | 24 V DC ±20 % (reverse polarity protected) 5 V DC ±5 % (no reverse polarity protection) |
| Current consumption | <20 mA (at 24 V DC, unloaded) <75 mA (loaded) |
| Output circuit | PP, LD (RS422), TTL (PP only at 24 V) |
| Output signals | A, /A, B, /B, I, /I, R, /R, FR, /FR (quadrature signal) |
| Output signal level high | >UB - 2.5 V (PP) >2.5 V (LD) >2.4 V (TTL) |
| Output signal level low | <0.8 V (PP) <0.5 V (LD) <0.4 V (TTL) |
| Latency | 1.5 µs |
| Jitter | <15 % (0.5 mm reading distance) |
| Pulse width of reference signal | 1 increment(s) |
| Real-time requirement | speed-proportional signal output |
| Type of connection | open cable end plug connector (7/8-pole) D-Sub (9-pole) |
| System data | |
| Resolution | 0.04, 0.05, 0.08, 0.1, 0.16, 0.2, 0.8 mm |
| Scaling factor | 1, 4, 5, 8, 10, 16, 20, 64 |
| Linearity deviation | ±30 µm (at TU = 20° C, reading distance 1 mm) |
| Repeat accuracy | ±1 increment(s) |
| Measuring range | ∞ |
| Circumferential speed | ≤25 m/s (≤3.2 m/s referencing speed) |
| Travel speed | ≤25 m/s (≤3.2 m/s referencing speed) |
| Ambient conditions | |
| Ambient temperature | -10 … 70 °C |
| Storage temperature | -30 … 80 °C |
| Relative humidity | 100 % (condensation admissible) |
| EMC | EN 61000-6-2 (interference resistance / immission) EN 61000-6-4 (emitted interference / emission) |
| Protection category | IP67 (EN 60529) |
| Shock resistance | 500 m/s2, 11 ms (EN 60068-2-27) |
| Vibration resistance | 100 m/s2, 5 … 150 Hz (EN 60068-2-6) |
(