Magnetic sensor MSK5000
PRODUCENT CODE: -
CATEGORY: Linear position transducers - Magnetic sensors - Magnetic sensors
Producer: SIKO GmbH
The product is available on request
At the moment, the product is not available in our warehouse.
After placing the order, we will notify you of the expected delivery date of the product.
At the moment, the product is not available in our warehouse.
After placing the order, we will notify you of the expected delivery date of the product.
Fast shipping
Free delivery
from 1000 PLN (net)
Free delivery
from 1000 PLN (net)
Do you have questions about the product?
Ask an experienced consultant:
Ask an experienced consultant:
Description
- Max. resolution 1 μm
- Repeat accuracy ±0.01 mm
- Repeat accuracy of ±1 increment
- Status LED display
- Works with MB500/1 magnetic tape, MR500 magnetic ring, MBR500 magnetic tape ring
- Reading distance ≤2 mm
- Max. 200000 pulses/revolution in combination with MR500 or MBR500 (160 poles)
- Optionally with reference point R or flexible reference marks FR
Technical data
| Mechanical data | |
| Housing | synthetic material ABS black (K design) zinc die-cast/aluminum (M design, aluminum front cover) zinc die-cast (ZM design) |
| Sensor/band reading distance | 0.1 … 2 mm (O, I reference signals) 0.1 … 1.5 mm (R reference signal) 0.4 … 1 mm (FR reference signal) |
| Sensor/ring reading distance | 0.1 … 2 mm (O, I reference signals) 0.1 … 1.5 mm (R reference signal) |
| Cable sheath | PUR, suitable for drag-chain use (6, 8-wire ø5-0.4 mm) |
| Cable bending radius | 5x cable diameter (static) 7.5x cable diameter (dynamic) |
| Service life of cable | >5 million cycles (under the following test conditions: travel range 4.5 m travel speed 3 m/s acceleration 5 m/s2 ambient temperature 20 °C ±5 °C) |
| Electrical data | |
| Operating voltage | 6.5 … 30 V DC (reverse polarity protected) 4.75 … 6 V DC (without reverse polarity protection) |
| Current consumption | <25 mA (at 24 V DC, unloaded) <75 mA (loaded) |
| Output circuit | PP, LD (RS422) |
| Output signals | A, /A, B, /B, I, /I, R, /R, FR, /FR |
| Output signal level high | >UB - 2.5 V (PP) >2.5 V (LD) |
| Output signal level low | <0.8 V |
| Latency | 1.5 µs |
| Pulse width of reference signal | 1 or 4 increment(s) |
| Real-time requirement | speed-proportional signal output |
| Type of connection | open cable end plug connector (7/8-pole) D-Sub (9-pole) |
| System data | |
| Resolution | 0.001, 0.005, 0.01, 0.025, 0.05, 0.1 mm |
| Scaling factor | 12.5, 25, 50, 125, 250, 1250 |
| Linearity deviation | ±20 µm (at TU = 20° C, reading distance 1 mm) |
| Repeat accuracy | ±10 µm |
| Measuring range | ∞ |
| Circumferential speed | depending on scaling factor and pulse interval (see table) |
| Travel speed | depending on resolution and pulse interval (see table) |
| Ambient conditions | |
| Ambient temperature | -10 … 70 °C |
| Storage temperature | -30 … 80 °C |
| Relative humidity | 100 % (condensation admissible) |
| EMC | EN 61000-6-2 (interference resistance / immission) EN 61000-6-4 (emitted interference / emission) |
| Protection category | IP67 (EN 60529) |
| Shock resistance | 500 m/s2, 11 ms (EN 60068-2-27) |
| Vibration resistance | 100 m/s2, 5 … 150 Hz (EN 60068-2-6) |
(