Fluxicont® FS4
W chwili obecnej produkt nie jest dostępny w naszym magazynie.
Po złożeniu zamówienia, powiadomimy o przewidywanym terminie realizacji danego produktu.
Darmowa dostawa
od 1000 PLN (netto)
Zapytaj doświadczonego konsultanta:
Flow switch for general applications Monitoring of flow and temperature in liquids
- Short response time
- Wareless
- Display and operating on site improofes operator comfort
The Fluxicont FS4 is an electronic flow resp. temperature switch for monitoring, control as well as continuous measurement of flow and temperatures in liquids.
Due to the device construction with flow velocities from 3cm/s to 300cm/s , process temperatures from –20°C to +110°C, process pressures up to 40bar, process material stainless steel V4A as well as the availability of industrial standard process connections like thread ISO 228-1 thread ANSI NPT – on request and thread ISO 225-1 M18x1,5 for adapter – on request the device is especially suitable for the use for monitoring cooling water circulation systems of pumps, turbines, compressors and heat exchangers, for monitoring pump functionality, for dry run protection for pumps, for leak monitoring in process lines, monitoring lubrication systems and filter monitoring in the beverage industry.
The flow switch is suitable for demanding measuring requirements.
Due to its high accuracy and the high flexibility of configuration, the Fluxicont FS4 can be suited a wide variety of applications.
The robust design and the high-quality workmanship turns the device into a very high quality product, which even the most adverse environmental conditions cannot affect, whether the lowest temperatures when used outdoors, extreme shock and vibration or aggressive media.
A captive laser marking of the type label ensures the identifiability throughout the entire lifetime of the device.
Obviously is the optional marking of a measurement point designation resp. TAG, a customer label or of a neutral type label, of course also per laser marking.
A LABS-free resp. silicone-free version, a factory calibration with calibration certificate and a customer specific configuration resp. preset is also optionally available like a material test certificate EN10204 3.1 or factory certifications for drink water resp. food suitability.
Customer specific special versions can be realized on request, e.g. software adaption (menu navigation, special functions, etc.), changed terminal assignment resp. connector orientation, design adaption of the user surface and special designs for the process connection.
| Czas odpowiedzi krokowej | Flow: ≤ 6s (td = 0s / 0% >> 90% / 100% >> 10%) Temperature: ≤ 4s |
| Czas uruchamiania tOn | Flow: ≤ 10s Temperature: ≤ 2s |
| Direct voltage | |
| Electronic output type | A / B / C / D |
| Napięci zasilania US | 10,5V…35 V DC Reverse polarity protected |
| Residual ripple UPP | ≤ 2VPP USmin ≤ US ≤ USmax |
| Supply current IIn | ≤ 100mA S1 / S2 = 0mA Iout = 22mA |
| Napięcie izolacji | 500VAC (electrical connections – enclosure) |
| Universal voltage | |
| Electronic output type | W |
| Napięci zasilania US | 20V…253 V AC – 48/62Hz 20V…220 V DC |
| Supply power PIn | ≤ 4VA 2W |
| Protection classification | I (EN 61140) |
| Kategoria przeciążenia napięciowego | II (EN 60664-1) |
| Input | |
| Measurement parameter | Flow velocity |
| Measurement principle | calorimetric |
| Measurement medium | Liquids |
| Zakres pomiarowy | 3…300 cm/s Greatest sensivity: 3…100 cm/s Factory setting: 0…100 cm/s |
| Temperature gradient | ≥ 300 K/min |
| Switch output PNP S1 / S2 | |
| Electronic output type | A / B / C / D |
| Funkcje | Przełącznik PNP na + L |
| Output voltage UOut | UOut ≥ US – 2V |
| Output current IL | 0mA…200mA current limited, short circuit protected |
| Rise time T90 | < 30µs (RL < 3kR / IOut > 4,5mA) |
| Cykl przełączania | ≥ 100.000.000 |
| Switch output relay S1 | |
| Electronic output type | W |
| Funkcje | Relay changeover contact – switch to L/+L |
| Switching values | ≤ 2A ≤ 62,5VA 60W |
| Cykl przełączania | ≥ 100.000 |
| Analogue output Aout – Current 4…20mA | |
| Electronic output type | B / C / D |
| Obszar roboczy IOut | 3,8mA…20,5mA min. 3,6mA max. 22mA |
| Dozwolony ładunek RL | ≤ (US – 10,5V) / 20mA |
| Measuring accuracyv | |
| Accuracy Flow | ≤ ±5% MEV14: 5…100 cm/s, -20°C…+85°C ≤ ±10% MEV14: 100…175 cm/s, -20°C…+85°C |
| Accuracy Temperature | ≤ ±1,5K (≥ 20cm/s) |
| Dryf długoczasowy | Flow: ≤ ±10% MV13/year, -20°C…+85°C |
| Odchylenia temperatury | Flow: ≤ ±0,4cm/s /K, -20°C…+85°C |
| Materiały | |
| Probe (process wetted) | Stal 1.4404 (316L) |
| Przyłącze procesowe (proces zwilżany) | Stal 1.4571 (316Ti) |
| Uszczelki | FPM - fluorelastomer (np. Viton®) |
| Warunki środowiska pracy | |
| Temperatura środowiska | -20°C…+85°C |
| Temperatura procesu | -30°C…120°C |
| Ciśnienie procesu | ≤ +40bar |
| Protection classification | IP65/IP67 (EN/IEC 60529) |
(