![Hydrocont LK](/files/products/acs-control-system/hydrocont-lk/hydrocont-lk.jpg)
Hydrocont LK
W chwili obecnej produkt nie jest dostępny w naszym magazynie.
Po złożeniu zamówienia, powiadomimy o przewidywanym terminie realizacji danego produktu.
Darmowa dostawa
od 1000 PLN (netto)
Zapytaj doświadczonego konsultanta:
Level probe as a probe or suspension suitable for outdoor installation
Compact hydrostatic level measurement, with dry, capacitive sensor.
Analog output 4 … 20mA or 0 … 10V
- Low cost sensor with no compromises in quality
- To be used for hanging or screwed installations
- Solid an precise ceramic cell
The device Hydrocont® LK with integrated analogue evaluation electronic is a compact hydrostatic transmitter for continuous measuring of filling levels in liquids at hydrostatic pressures from 0 up to 1 bar within pressure less container, at process temperatures from – 40°C to +100°C.
The use of a capacitive measuring sensor with ceramic membrane, allows the use in nearly all fields of industry.
Application fields are e.g. the measurement of levels in reservoirs, clarification basins, deep wells etc., but also the filling level measurement in closed containers at liquids, like e.g. water, waste water, solvents, oil, sludge, fat, cleaning liquids, etc.
Function
The device Hydrocont® LK is used for filling level measurement by measuring the hydrostatic pressure.
The device can be alternatively used as put in sensor that is sunken down into the liquid by the carrying cable and a suitable fastening, e.g. cable clamp fixing or screw plug or also be screwed-in from outside into the container wall.
Supply voltage | |
2-wire 4…20 mA | 10…30 V DC |
3-wire 0…10 V | 14…30 V DC |
Supply current | |
2-wire 4…20 mA | ≤ 30 mA |
3-wire 0…10 V | ≤ 6 mA |
Dokładność pomiarowa | |
Odchylenia temperatury | ≤ 0,15% FS / 10 K |
odchylenie w charakterystyce | ≤ 0,1% / 0,25% FS |
Dryf długoczasowy | ≤ 0,15% FS / year (not cumulative) |
Material | |
Membrane (medium contact) | Ceramic AL2O3 96% |
Process connection (medium contact) | Steel 1.4404 (AISI 316L) 1.4571 (AISI 316 Ti) |
Housing rope | Stal-CrNi |
Gaskets (medium contact) | FPM – Fluoroelastomer (Viton®) EPDM – ethylene-propylene-diene monomer NBR – Nitrile Butadiene Rubber |
Anschlusskabel | Coated cable PE Polyethylen |
Connection cable | PE / PUR |
Warunki środowiska pracy | |
Temperatura otoczenia | -20°C…+70°C |
Temperatura procesu | -20°C…+70°C |
Outdoor installation via process connection | -40°C…+100°C |
Zakres ciśnienia procesowego | 0…1 bar |
klasa ochrony | IP68 DIN EN 60529 |