Kontroler bezpieczeństwa EM1
Enclosure:
Housing IP30, Terminals IP20
Number of Safety Inputs:
2 Normally Closed
Number of Safety Outputs:
2 Normally Open
Reset Options:
Automatic / Manual
Expandability:
Up to 20 Dual Channel Devices
Safety Rating:
CAT4, SIL3, PL-e
The EM1 is designed to operate and monitor emergency stop buttons and/or any mechanical device (locking or non-locking) with 2 normally closed channels. The master control unit can monitor one 2NC safety device and can be extended using the ESM module to a maximum of 20 dual channel devices. To operate this product, you will require a 24VDC supply.
This product is ideal for eliminating fault masking, as it is recommend you connect one device per module. Its simple design makes the EM1 easy to maintain, improving fault finding and subsequently reducing downtime.
| Nazwa | Numer referencyjny | Cena |
|---|---|---|
| EM1-24VDC | 330.005 | - |
| Specyfikacja techniczna | |
| Opcje napięcia zasilania | 24VDC |
| Pobór mocy | 6VA |
| Wyjście bezpieczne | 2 NO |
| Ocena wyjścia bezpieczeństwa | 4A/230Vac; 2A/24Vdc(Res.) @Cos=1 |
| Przewód/złącze | Zaciski śrubowe |
| Wejście | 2 NC Safety Inputs and/or Emergency Stop |
| Opcje resetowania | Manual / Automatic |
| Wskazanie | LED's for Power, Run & Fault. Guard Status LED |
| Wymiary jednostki sterującej (mm) | 105 x 90 x 59mm |
| Masa | DC = 290g AC = 420g |
| Klasa IP | Obudowa IP30, zaciski IP20 |
| Budowa | Grey PC-GF |
| Montaż | 35mm szyna DIN |
| Parametry środowiskowe | |
| Temperatura robocza | 0°C do 45°C |
| Temperatura przechowywania | -20°C do 60°C |
| Dane dotyczące bezpieczeństwa | |
| PL zgodnie z EN ISO 13849-1 | PL-e, CAT 4 |
| SIL CL zgodnie z EN IEC 62061 | SIL 3 |
| PFHd zgodnie z EN IEC 62061 | 6.0 x 10 -9 |
| PFH | 6.52 x 10 -9 |
| B10d | 2,000,000 |
| MTTFd | > 100 lat (w oparciu o wskaźnik wykorzystania 360 dni) |
| TM | 20 lat |
| DC | 99% |
| SFF | 99.50% |
(